mmWave Kits for Educational & Development | Beamforming, Beam tracking | https://tmytek.com

Key Features and Benefits

TMYTEK Developer Kits offer an exceptional way to learn new antenna technologies hands-on, via step-by-step directions. In addition to targeting education and academics, these solutions are also ideal for R&D as prototype development tools to thoroughly evaluate hardware, software algorithms, and array antennas. With deployments of these kits already in recognized universities and development centers worldwide, we confidently offer best practices into the research and development of mmWave technologies.

For Developers
  • Ready-to-use complete mmWave communication testbed suite
  • Flexible array antenna test platform
  • Time-saving theories to prototyping
For Education
  • Step-by-step courses in beamforming technologies
  • Affordable and flexible experiment cases

World’s first beamforming experiment solution for developers

The 5G mmWave Developer Kit can be used for a variety of 5G mmWave beamforming research and development projects. BBoard with AAkit and PLO can a beam generator that emits beams at mutilple angles. A CoCo antenna with a amplifier and a power detector, on the other hand, can receive and detect signals.

Communication System Prototyping

By connecting UD Box with any baseband instruments, developers and researchers can conduct more 5G mmWave communication R&D projects.

  • Compatible with most SDRs: NI USRP/ Xilinx FPGA
  • Beam tracking algorithm development
  • Beam management implementation

World’s first beamforming tool kit for educational

5G mmWave courseware and Lab Cookbook teach the principles behind beamforming and experiments to understand the propagation property of millimeter-wave signals.
Read about the 5G Beamforming Directivity experiment that Prof. Bjorson conducted using the Dev Kit.

Fundamentals of mmWave communication by Prof. Emil Björnson

Prof. Emil Björnson explains and demonstrates the fundamental properties of multi-antenna communications in mmWave bands. Beamforming directivity, wireless propagation loss, constructive/destructive interference, maximum ratio, and zero-forcing beamforming are covered.

NextGen Wireless Edu Solution is available now!

Looking to expand your capabilities in millimeter wave teaching and research? Now you just need the UD Kit, which comes with a frequency converter, LO, and USRP. It perfectly complements the mmWave Developer Kit and provides the necessary tools to explore these advanced concepts in depth.

Array Antenna Verification

Antenna engineers can verify their design.

Four independent RF channels synthesize beams by adjusting the phase and amplitude of each channel.

Affordable and Time-Saving

5G mmWave Developer Kit can make Professors’ life easy in courseware preparation and help engineering students learn the fundamentals of beamforming and mmWave propagation.

Courseware: Basic RF Training and Beamforming

To educate next-generation RF engineers, the Dev Kit provides not only a comprehensive mmWave hardware but also lab sheets to save professors' time in courseware preparation.

Lab sheet
Lab 1: Channel gain
Lab 2: Link budget estimation
Lab 3: Phase calibration
Lab 4: Beamforming
Lab 5: Beam steering
Lab 6: Beam pattern measurement
Lab 7: Receiver channel gain measurement
Lab 8: Receiver in-phase implementation

Package Includes

Signal Source - PLO

  • Freq: 26.5 - 29.5GHz
  • Freq.Step: 8
  • Output Power: 9 dBm±1 dBm@28 GHz

5G FR2 Beamformer - BBoard

  • Freq: 26.5 - 29.5GHz
  • 4 Controllable RF Channels
  • 15 dB Gain Control Range
  • Max Gain: 18dB Tx

Power Detector

  • Freq: 100MHz - 40GHz
  • 35dB Linear Dynamic Range(< ± 1dB Error)

28 GHz CoCo Antenna

  • Freq: 27 - 29 GHz
  • Gain: 7 dBi @28GHz
  • Omni - Directional Radiation at Horizontal Plane(within ± 1dB Gain Variation)

RF Cables

  • Support Up to 40 GHz
  • Low Insertion Loss

Array Antenna AA Kit

  • Freq: 26.5 - 29.5 GHz
  • Antenna Gain: 15dBi
  • 4 Elements

Amplifier

  • Freq: 20 - 40 GHz
  • Gain: 15dB
  • Noise Figure: 3.5dB

Power Combiner

  • Freq: 25 - 31 GHz
  • Insertion Loss: 2 dB Max
  • Isolation: 15 dB Max

mmWave Beamformer with GUI

The intuitive GUI TMXLAB Kit (TLK) connects to the BBoard via the LAN port to control the phase and amplitude of each RF port to form the beams. An API is included and it is compatible with LabVIEW, MATLAB, Python, C#, C++, and other programming languages.

Related Products

UDBoard

Talk to Expert.

We’re here to help you find the best solution for your project.

Download Flyer

Download Dev Kit Flyer

Download Flyer

Download Dev Kit Solution Flyer

This website uses cookies to collect your information for improving the service quality. If you reject cookies, some functions of this website may not work properly.

Cookies Settings